Civil/Survey
Training Manual by Eagle Point Software Base Working
Eagle
Point Software™ and the Eagle Point Software logo are trademarks of Eagle Point
Software.
AutoCAD® is a registered trademark of Autodesk, Inc.
MicroStation®
is a registered trademark of Bentley Systems, Inc.
Windows® is a registered trademark of Microsoft Corporation.
Windows® is a registered trademark of Microsoft Corporation.
All
other product names are trademarks or registered trademarks of their respective
holders.
Information
in this manual is subject to change without notice and does not represent a
commitment on the part of the vendor. The software described in this manual is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement.
commitment on the part of the vendor. The software described in this manual is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement.
Eagle Point Software™ has carefully prepared this program package,
including research, development, and testing to ascertain its
effectiveness and accuracy. However, no
warranty of any kind is made with respect to this program package or its related material except as may be expressly stated in the licensing agreement or other contractual
document. In no event is Eagle Point Software™ to be liable for incidental or
consequential damages in connection with, or arising out of, the furnishing, performance or use of this program package.
warranty of any kind is made with respect to this program package or its related material except as may be expressly stated in the licensing agreement or other contractual
document. In no event is Eagle Point Software™ to be liable for incidental or
consequential damages in connection with, or arising out of, the furnishing, performance or use of this program package.
Circle double mouse click and NextAdding
a Project To add a project to the Open dialog box, complete the following steps:
Click on the Create New Project/Sub-Project icon on the Open dialog box.
Figure 1-1 Open Dialog Box
2.C i v i l / S u r v e y T r a i n i n g M a n u a l
The system displays the New dialog box, which allows you to add a new project
2. Highlight Eagle Point Project to add a new project.
3. Click on the Next button to enter the description and drawing/design filename, as shown below
.
Figure 1-3
New Project Dialog Box
4. Type Next Step in the Project Description
edit field.
Project
Drawing/Design File edit fiel.
Drawing/Design File edit fiel.
6.
Click on the Finish button to add the new project.
The system displays the Eagle Point Open dialog
box (Figure 1-1 on page 2).
7.
Click on the Filter the Project/Sub-project Listing icon.
8. Toggle on Description.
9. Type 3<1CCÊ in the edit field.
The Project Filters dialog box provides a method to list only projects with specified descriptions or drawings, or those linked to a specific sub-project. In this case, only projects with the description beginning with CLASS are listed.
10. Click on OK to retain the setting.
The system displays the Eagle Point Open dialog box (Figure 1-1 on page 2).
11. Double click on the desired project or highlight the project description and click
on OK or press Enter.
Settings Options
Before we proceed with the project, we need to verify and/or change some project settings.
Units
To accomplish this task, complete the following steps:
1. Select System Æ Units.
The system displays the Units dialog box.
2. Select Angular from the Category drop list.3. Set the Input and Output drop lists to Degrees, Minutes, Seconds.
4. Select Degree of Curvature from the Category drop list.5. Set the Input/Output drop list to Arc Definition.6. Type ! for the length of the Degree of Curvature (Arc).7. Select Linear from the Category drop list.Notice the unit of measurement we have established for this project.8. Select Planimetric Area from the Category drop list.9. Set the Input and Output drop lists to Square Feet.
10. Click on OK to retain the settings.
Formats
1. Select System Æ Formats.
The system displays the Formats dialog box.
2. Select Horizontal Direction from the Category drop list.
3. Set Format to Bearing.
4. Select Nodes from the Category drop list.
5. Set ID Format to Alphanumeric.
6. Verify that Point Protection is toggled on.
7. Select Stationing from the Category drop list.
8. Set Format to +00.
9. Click on OK to retain the settings.
